Swann Chematest 35 Operator's Manual page 6

Chematest 35
Safety Instructions
4
Reagents
WARNING
Multiple Hazards
For safe handling of the reagents, you must read and under-
stand the corresponding Material Safety Data Sheets (MSDS).
These can be downloaded from www.swan.ch.
General Handling Guidelines
 Only charge the instrument using a standard type A USB
socket and the supplied USB cable.
 Protect from heat and splash water during charging.
 When no charging or sensor cable is connected, close both
sockets with the covers.
 Do not expose the instrument to direct sunlight or other
sources of heat, especially when charging.
 The housing of the Chematest 35 must not be opened except
for the housing parts specified in the maintenance chapter.
 The battery must only be replaced by authorized service
personnel.
A-96.730.121 / 160920