Swann Chematest 35 Operator's Manual page 19

Chematest 35
Photometry
A-96.730.121 / 160920
Step 3: Display and storage of the measured results
Free chlorine
0.26
<Enter> to save
Free chlorine
Please select
ID ID1
User User1
------------------------------------------
<Enter> to continue
Free chlorine
ID
Please select
---------------
ID ID1
ID1
User User1
ID2
------------------------------------------
ID3
<Enter> to continue ID4
Free chlorine
User
Please select
------------------
ID ID1
User 1
User User1
User 2
------------------------------------------
User 3
<Enter> to continue User 4
Free chlorine
Please select
ID ID1
User User1
------------------------------------------
<Enter> to continue
Summary
Date, Time 05.11.18 15:21
Free chlorine 0.26 ppm
------------------------------------------
<Enter> to finish
 Pressing [Enter] saves the
83%
measurement in the data history.
 The measurement is initially
saved without ID and user.
ppm
NOTICE: Pressing [Exit]
discards the measurement.
 Depending on the
83%
configuration, a selection
dialog for user and/or ID is
displayed or the summary
screen is displayed directly.
This can be set under
Attribute, p.
 If applicable:
83%
– Select an ID from the list.
– Select a user from the list.
NOTICE: If you press [Exit] at
this point, you return to the main
screen, saving the measurement
without user and ID.
83%
 Select "<Enter> to continue" and
83%
confirm with [Enter].
 The ID and the user are
added to the entry in the data
history.
 Press [Enter] to return to the main
83%
screen.
43.
17