Advertisement
Available languages
Available languages
Recommendations on the appliance op-
eration
Before starting work
• If necessary connect extension hose 14 to the appli-
ance (CT36036)�
• If you are going to inflate sports equipment, put the
appropriate replaceable tip 13�
• Power cable 8 should be fully unwound as it im-
proves efficiency of the appliance function.
General recommendations (see fig. 3-9)
• CT36059, CT36060 - extract cigarette lighter and
insert plug 17 into cigarette lighter socket as shown
in fig. 3.
• CT36036 - connect the appliance to the vehicle ac-
cumulator as shown in fig. 8. Observe polarity when
connecting the appliance to the vehicle accumula-
tor: clamp 6 ("+" with red handles) should be con-
nected to "+" output of the accumulator; clamp 7
("-" with black handles) should be connected to -
output of the accumulator.
• Screw nipple cap 21 off the tire nipple (see
fig. 4.1, 6.1, 8.1).
• Screw nozzle 9 onto the tire nipple (see
fig. 4.2, 6.2, 8.2).
• Turn on the appliance�
• Inflate the tire, while observing indications of the
LCD display 16 (CT36059, CT36060) or manometer 5
(CT36036)� Having reached the necessary pressure
turn off the appliance�
• Screw nozzle 9 off the tire nipple�
• Screw nipple cap 21 onto the tire nipple�
• Disconnect the appliance from the socket of the
cigarette lighter or vehicle accumulator�
Appliance maintenance / preventive
measures
Disconnect
the
socket
of
the
The manufacturer reserves the possibility to introduce changes.
appliance
from
cigarette
lighter
cle
accumulator
procedures.
Cleaning the appliance
It is required to periodically clean the outer surface of
the appliance with a soft brush and a cloth, and blow
the parts of the appliance with compressed air� Do not
use caustic substances or solvents to clean the appli-
ance�
After-sales service and application service
Our after-sales service responds to your questions
concerning maintenance and repair of your product as
well as spare parts� Information about service centers,
parts diagrams and information about spare parts can
also be found under: www.crown-tools.com.
Transportation of the appliances
• CT36036 - only move the аppliance by handle 4 or
by picking it up and supporting from the bottom� Do
not move the аppliance by other parts (by pulling the
hoses or power cable, etc�)�
• Categorically not to drop any mechanical impact on
the packaging during transport�
• When unloading / loading is not allowed to use any
kind of technology that works on the principle of clamp-
ing packaging�
Environmental protection
The plastic components are labelled for categorized
recycling�
the
These instructions are printed on recycled paper man-
or
vehi-
ufactured without chlorine�
English
12
before
Recycle raw materials instead of dispos-
ing as waste.
Appliance,
accessories
should be sorted for environment-friendly
recycling�
carrying
out
any
and
packaging
Advertisement
