Advertisement
IMPACT DRIVER SAFETY WARNINGS
Hold
power
performing an operation where the fastener may contact hidden
wiring.
Wear personal protective devices when impact drilling or
hammering. Exposure to the work can cause hearing loss and eye
problems. Wear safety goggles or other eye protection.
Hammering and drilling operations cause chips to fly.
Use clamps or other practical way to secure and support the
work piece to a stable platform. Holding the work by hand or
against your body is unstable and may lead to loss of control.
Accessories and tools get hot during operation. Wear gloves when
touching them.
Do not operate this tool for long periods of time. Vibration
caused by tool action may be harmful to your hands and arms. Use
gloves to provide extra cushion and limit exposure by taking
frequent rest periods.
Always use respiratory protection appropriate for the dust
exposure. Avoid prolonged contact with dust from drilling, and
other activities. Wear protective clothing and wash exposed areas
with soap and water. Allowing dust to get into your mouth, eyes,
or lay on the skin may promote absorption of harmful chemicals.
When not in use, place tool on its side on a stable surface where
it will not cause a tripping or falling hazard. Some tools with
large battery packs will stand upright on the battery pack but may
be easily knocked over.
Adopt the correct working practices in order to reduce the
exposure to vibration. While working with this power tool,
hand/arm vibrations occur.
Never attempt to open the product housing for any reason. If
the plastic housing of the product breaks open or cracks,
immediately discontinue its use and do not recharge it.
Always be alert when using this product, so that you can recognise
and handle risks early. Fast intervention can prevent serious injury
and damage to property.
tool
by
insulated
gripping
6
surfaces,
when
IBL BM18-60
Advertisement
