Fluid Type - Harbor Freight Tools PacificHydrostar 68387 Manual

Before start-up, note the following:
The pump can be connected to any shock-proof plug
which has been installed according to regulations.
The plug must have a supply voltage of 120V~, 60Hz.
CAUTION
This pump has been evaluated for use with water only.
WARNING
IMPORTANT! For your own safety –
before starting to run the pump, please have
the following items checked by an expert:
1. Risk of electric shock – This pump is supplied
with a grounding conductor and grounding-type
attachment plug. To reduce the risk of
electric shock, connect only to a properly
grounded, grounding-type receptacle.
2. Risk of electric shock – This pump has not been
investigated for use in swimming pool areas.
3. The electrical connections must be
protected from moisture.
4. If there is danger of flooding, the electrical
connections must be taken to higher ground.
5. Circulation of caustic fluids, as well as the circulation
of abrasive materials, must be avoided at all costs.
6. The pump must be protected from frost.
7. The pump must be protected from running dry.
8. Access by children should also be
prevented with appropriate measures.
9. WARNING: Handling the Power Cord
on this product will expose you to lead,
a chemical known to the State of California
to cause cancer, and birth defects or other
reproductive harm. Wash hands after handling.
(California Health & Safety Code § 25249.5, et seq.)
10. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by
the operator that common sense and caution are
factors which cannot be built into this product,
but must be supplied by the operator.

Fluid Type

The Pump is designed for use with water with
a maximum temperature of 77° F (25° C).
Do not use the pump for other fluids, especially not fuels,
cleaning fluids, or other chemical products.
Page 2
Brought to You by www.snapwhole.com
For technical questions, please call 1-800-444-3353.
Specifications
Model
120V~ 60Hz
Power Requirements
Discharge/Intake
Maximum Flow
Maximum Well Depth
Maximum Lift
Pump Body Material Stainless Steel
Air Bladder Pressure
Start Pressure
Stop Pressure
Maximum Water
Temperature
NOT FOR POTABLE WATER.
Note: Performance of this pump
(if powered by line voltage) may vary
depending on variations in local line voltage.
Extension cord usage may also affect pump performance.
Unpacking
When unpacking, make sure that the item is
intact and undamaged. If any parts are missing
or broken, please call Harbor Freight Tools at
1-800-444-3353 as soon as possible.
68387
68388
(JTP-331) (JTI-281)
120V~ 60Hz
7.82A 1HP 5.05A 3/4HP
1 IN. NPT
950 GPH 740 GPH
26 FT.
115 FT.
Cast Iron
28 PSI
30 PSI
50 PSI
77° F (25° C)
236418
SKU 68387 & 68388