Table of Contents
Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
SUBMERSIBLE
POND PUMP
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2016 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
REV 16k
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Harbor Freight Tools creekstone 63313
Summary of Contents for Harbor Freight Tools creekstone 63313
- Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing SAVE THIS MANUAL.
- Page 2 Before start-up, note the following: The pump must be connected to a GFCI protected plug which has been installed according to regulations. The plug must have a supply voltage of 120 VAC at 60 Hz. CAUTION This pump has been evaluated for use with water only. WARNING IMPORTANT! For your own safety –...
-
Page 3: Installation Instructions
Specifications Electrical Rating 120VAC / 60Hz / 0.2A Power Cord Length 12’ Maximum Flow @ 0’ 264 GPH Maximum Head lift @ 0 Flow 5.5′ Discharge Port 1/2″ Installation The submersible motor pump must be installed in a stationary position with either: a. - Page 4 Operation After reading these instructions, consider the following points before starting the pump: 1. Verify that the pump rests on the floor of the basin, 4. Verify that the electrical socket is GFCI if it is not suspended by the handle. protected and in good condition.
-
Page 5: Troubleshooting
Maintenance TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Unplug the Pump from its electrical outlet before performing any inspection, maintenance, or cleaning procedures. If the pump is moved during operation, flush it out with clean water after every use. Quarterly Maintenance The below maintenance must be performed at least once every 3 months under optimal conditions. -
Page 6: Parts List
Parts List and Diagram PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. - Page 7 Assembly Diagram Item 63313 For technical questions, please call 1-888-866-5797. Page 7...
- Page 8 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Need help?
Do you have a question about the creekstone 63313 and is the answer not in the manual?
Questions and answers
How do I register my pond fountain for a warranty?
The provided information does not mention a registration process for the warranty. To take advantage of the warranty, the product or part must be returned with prepaid transportation charges, proof of purchase date, and an explanation of the complaint. If a defect is verified upon inspection, the product may be repaired or replaced.
This answer is automatically generated