Advertisement
OPERATION
END INDICATOR LAMP
This indicator lamp indicates
that playback or recording is
finished.
RECORD LEVEL
CONTROLS
Adjust these controls for
adequate recording levels.
MIC JACKS
Plug microphones into these
jacks
RECORD BUTTON
To
record,
keeping
the
cartridge inserting, press this
button.
CARE & MAINTENANCE
RECORDING
LEVEL
TOO LOW
PROGRAM INDICATOR
LAMPS
These
indicator
lamps
indicate program numbers.
A L C
B U T T O N
( A U T O M A T I C
L E V E L
CONTROL)
To control the record level
automatically
press
this
button.
(CONTINUED)
RECORD LEVEL METER
IDEAL
RECORDING
LEVEL
RECORDING
LEVEL
TOO HIGH
TIME COUNTER
This counter indicates the
passed times of recording
and playback.
CO UN TE R
RE S E T
BUTTON
To reset the time counter
press this button.
F A S T
F O R W A R D
BUTTON
To skip a selection or rapidly
advance the tape, press this
button.
4.
CABINET & METER CLEANING
Cleaning cabinet with a mild soap solution and a soft damp
cloth. Do not wipe the meter with a dry cloth. This will
create a static charge on meter cases that will cause the
needles to stick. To correct this condition, wipe the meter
faces with a cloth dampened in a detergent solution (in
water). Allow meters to air dry, rather than wiping with a
dry cloth.
5.
IN CASE OF TROUBLE
When the unit does not function properly, contact your
dealer or the nearest authorized PIONEER Service Station.
FUNCTION SELECTOR
ONE:
Playback
and
recording will be stopped at
the end of each program
and the END indicator lamp
will be lit up.
ALL:
When program 4 is
finished, operation will stop
and the END indicator lamp
will be lit up.
ENDLESS:
Operation will
continue automatically.
PHONES JACK
To listen with a headphone,
insert the plug into this jack.
PAUSE BUTTON
To
stop
operation
of
recording or tape playback
temporarily,
press
this
button.
PROGRAM BUTTON
To
change
programs
manually, press this button.
Advertisement
