Allterco Robotics Shell Door/Window2 User Manual page 5

To add a new Shelly device, connect it to the power grid fol-
lowing the Installation Instructions included with the Device.
Step 1
Place your Shelly D/W sensor in the room where you want to
use it. Press the Button - the LED should turn on and flash
slowly.
WARNING: If the LED does not flash slowly, press and hold
the Button for at least 10 seconds. The LED should then flash
quickly. If not, please repeat or contact our customer support
at: support@shelly.cloud
Step 2
Choose "Add Device".
In order to add more devices later, use the Menu at the top
right corner of the main screen and click "Add Device".
Type the name and password for the WiFi network, to which
you want to add Shelly.
Step 3
If using iOS: you will see the following screen (fig. 4)
On your iOS device open Settings > WiFi and connect to the
WiFi network created by Shelly, e.g. ShellyDW-35FA58.
If using Android (fig. 5) your phone will automatically scan
and include all new Shelly devices in the WiFi network, that
you defined.
Upon successful Device Inclusion to the WiFi network you will
5