Specification; Installation Instructions - Allterco Robotics Shell Door/Window2 User Manual

Shelly Door/Window by Allterco Robotics is intended to be
placed on a door or window in order to be aware of any open/
close, incline of opening, LUX sensor and vibration alert*. Shelly
Door/Window is battery powered, with battery life up to 2 years.
Shelly may work as a standalone device or as an accessory to a
home automation controller.
* Some of the features will be available after a FW update of
the device.

Specification

Power Supply
2x 3V CR123A Batteries
Battery life
2 years
Complies with EU standards
• RE Directive 2014/53/EU
• LVD 2014/35/EU
• EMC 2004/108/WE
• RoHS2 2011/65/UE
Working temperature
-10 ÷ 50°C
Temperature meas. range:
-10°C ÷ 50 °C (± 1°C)
Radio signal power: 1mW

Installation Instructions

⚠CAUTION! Before beginning the installation please read the
accompanying documentation carefully and completely. Failure
to follow recommended procedures could lead to malfunction,
danger to your life or violation of the law. Allterco Robotics is
not responsible for any loss or damage in case of incorrect in-
stallation or operation of this device.
⚠CAUTION! Use the Device only with batteries which comply
with all applicable regulations. Inappropriate batteries may
cause a short circuit in the Device, which may damage it.
⚠CAUTION! Do not allow children to play with the device, espe-
cially with the Power Button. Keep the devices for remote con-
trol of Shelly (mobile phones, tablets, PCs) away from children.
USER GUIDE
Wi-Fi DOOR/WINDOW SENSOR
Radio protocol
WiFi 802.11 b/g/n
Frequency
2400 – 2500 MHz
Operational range (depending
on local construction):
• up to 50 m outdoors
• up to 30 m indoors
Dimensions
• Sensor 82x23x20mm
• Magnet 52x16x13mm
Electrical consumption
• Static current: ≤10 μA
• Alarm current: ≤60 mA
2