Advertisement
STAKING YOUR DRYER
(CONT.)
Stopping and restartinp your dryer
You can stop your dryer anytime during a cycle.
To restart your dryer:
Close the door, select a new cycle and temperature
(if desired), and push the Start button.
To stop your dryer:
Open the dryer door or turn the Cycle Control Knob
to off.
NOTE: The
Cycle Control Knob should point to an
Off area when the dryer is not in use.
iEWING ME RIGHT MI AND lWlPERATuRE
SETTING
The following
pages describe the drying cycles
on your dryer. The descriptions
include suggested
temperature
settings and drying times for various
loads.
cycle and temperature tips
0 Make sure you have selected the correct cycle
and temperature
for your load.
l
Dry most loads using the Energy Preferred
Automatic
Setting (+).
0 Use the Fluff Air cycle, or line dry rubber, plastic,
delicate, and heat-sensitive
fabrics.
l
If some types of loads in the cycle descriptions
on the following
pages have more than one
suggested temperature
setting, choose the
lowest setting available on your dryer.
a The last few minutes of all cycles are without
heat to make the load cooler to handle.
Drying tips
0 Always follow care label directions when they are
available.
l
If you use fabric softener sheets, always use
softener sheets that are labeled as dryer safe and
follow package instructions
carefully.
0 Remove the load from the dryer as soon as
tumbling stops to reduce wrinkling. This is
especially important for permanent press, knits,
and synthetic fabrics.
9
Advertisement
