Table of Contents
Advertisement
FUNCTIONS
Functions
POWER
To switch on the TV tuner, press the
POWER button.
To switch off the TV tuner, press the
POWER button again.
TV/AV
You can use the TV/AV button to switch
between the channel/input options TV,
CATV, AV1 and AV2.
CH
Channel search
switch to the next higher channel.
Channel search
switch to the next lower channel.
ADJ
Channel fine tuning > Carries out fine
tuning once more.
This function is necessary if the channel
you are searching for lies outside the
standard frequency raster.
ERASE
Erase button for thSelect the program
memory location, press the ERASE
button and confirm the erase action with
the OK button.
ESC
Return without saving if you are in the
menu or after pressing the Erase button.
> Press once to
> Press once to
ADD
Open the channel storing menu for the
program selection buttons > Select the
channel, press the ADD button, then
enter the number of the memory
location and confirm by pressing the OK
button.
MENU
Open the region menu > Briefly press
the menu button, use PRG
select the receivable region and confirm
by pressing the OK button.
Selection: PAL B/G, B/H, I, D/K, AUS;
SECAM L, L', DK, BG
DISP
Display the TV standards and channel
information.
Channel selection buttons 0 - 9
Program selection buttons for stored
favourites.
There are a total of 15 program memory
locations available.
(01-15)
PRG
Channel search Up/Down for stored
favourites.
Channel search UP/Down
OK
Confirmation button in function menus.
/
to
19
Advertisement
Table of Contents
