Table of Contents
Advertisement
NOTES ON INSTALLATION AND OPERATION
Notes on installation and
operation
Tuner connection
- The tuner must first be installed in a
suitable location. You must make
sure that the device is fixed securely
in place and that it is not subjected
to moisture or dirt. You must not lay
the connecting cables in a way that
could cause the vehicle passengers
to get inadvertently caught up in them
and rip them out.
- Please note that the tuner must not
be positioned near heat sources (e.g.
heating, direct sunlight) since this
could result in faulty behaviour as a
result of excess temperature.
- Connect all of the tuner's audio,
video and power supply connections
(see connection diagram in the
following picture) that you need for
your system installation. When
positioning the infrared sensor, make
sure there are no objects positioned
between the sensor and the place
where you usually keep your remote
control, since they could interfere
with the transmission of the infrared
signal.
Note:
The following diagram shows all of the
tuner's connection options. Your car
system's connections do not necessar-
ily have to be exactly the same as this.
16
Advertisement
Table of Contents
