Uconnect 4 Manual page 55

54 NAVIGATION MODE — IF EQUIPPED (4C NAV ONLY)
POI — ATM/Banking
To select an ATM or Bank POI, follow these
steps:
1. While in the Nav Main Menu, press the
Where To? button on the touchscreen,
then press the Point of Interest button on
the touchscreen.
2. Press the ATM/Bank button on the
touchscreen.
You can search for an ATM or Bank by the
following categories, which are button tabs
at the top of the screen:
Name

Distance

ABC (Search)

3. Press the desired ATM or Bank and press
"Route To" to confirm the route.
4. Press the GO! button to confirm the
destination and begin the route.
If you are currently on a route guidance and you
select an ATM or Bank POI, the system will ask
you to choose one of the following:
Cancel previous route

Add to Current Route

Within "Add to Current Route" you can add
the destination to the current route, or set it
as the final destination.
NOTE:
You can press the Back Arrow button on the
touchscreen to return to the previous screen or
the X button on the touchscreen to exit.