26. Now using your remote, highlight the "Key or passphrase" text field, then press the KB
(Keyboard) button to activate the on-screen keyboard. Then use your remote to enter your
Wi-Fi network password, paying close attention to correct cases and special characters.
Once entered, press the KB (Keyboard) button once again to close the on-screen keyboard.
Then press OK on your remote to save your password settings.
You should see an on-screen confirmation message saying your settings were "Successfully
saved".
Reload Portal
27. Your box is now fully configured. So finally, highlight "Reboot device" and press OK
using your remote. Press OK once again to confirm. The box will now restart.
28. If configured correctly, your MAG box should fully boot and load TV service.
Unsuccessful?