Configure Wi-Fi Network - MAG 322 Factory Reset & Configuration

19. On the next screen, highlight the "Portal 1 URL" text field and then press the KB
(Keyboard) button on your remote to activate the on-screen keyboard.
Then use your remote to enter primary3.magbox.tv
Once entered, press the KB (Keyboard) button once again to close the on-screen
keyboard. Then press OK on your remote to save changes.
20. Now press the EXIT button on your remote to return to the System Settings screen.

Configure Wi-Fi Network

21. If your MAG box uses a Wi-Fi connection to log onto your home network, you need to set
this up next. If your MAG box uses an ethernet connection, reinsert the ethernet cable at the
back of the box and skip to Step 27.
22. From the "System Settings" screen, highlight "Network" using your remote and press
OK.