Manual Hood Control; Intensive Setting; Automatic Start; Run-On Function - Bosch PVQ F1 Series Instruction Manual

Operating the appliance
en

Manual hood control

You can control the ventilation setting manually.
Using tall items of cookware may prevent the
Note:
extraction system from working at optimum power. The
extraction power can be improved by placing a lid on
the cookware at an angle.
Activation
Touch the symbol.
:
1.
The ventilation system starts at the preset power
level.
Within the next 10 seconds, select the required
2.
power level in the settings area.
The selected power level lights up.
Touch the symbol to confirm the selected setting.
:
3.
The ventilation system switched on.
Changing and switching off
Touch the symbol and select the required power
:
level or set it to ‹ in the settings area.

Intensive setting

There are two intensive modes for the ventilation
system. If you activate the intensive settings, the
ventilation system works at maximum output for a short
time.
Activation
Touch the symbol and select the required intensive
:
setting.
Intensive setting I : Select the power level
■
then touch the Boost
up. The intensive setting is activated.
Intensive setting II : Touch the Boost
■
again. The display lights up. The intensive setting
›
is activated.
After eight minutes, the appliance automatically
Note:
switches back to fan setting
Changing and switching off
Touch the symbol and select the required power
:
level or set it to ‹ in the settings area.

Automatic start

If you select a power level for a cooking zone, the
automatic start switches on. The ventilation system
switches on at a power level in accordance with the
respective power level for the cooking zones.
You can find out how to change this setting in section
~ "Basic settings".
16
Š
symbol. The display lights
G ›
symbol
G
Š .

Run-on function

The run-on function allows the ventilation system to
continue operating for a few minutes after the hob has
been switched off. This removes any remaining cooking
vapours. The ventilation system then automatically
switches off.
Activation
As standard, the run-on time is activated with a
maximum switch-off time. You can find out how to
change this setting in section ~ "Basic settings".
The run-on function only switches on if at least
Note:
one cooking zone has been switched on for at least one
minute.
Deactivating
Manual
Touch the
off.
Automatic
The run-on function is switched off in the following
cases:
The run-on time has elapsed.
■
The appliance is switched on again.
■
and
symbol. The run-on function is switched
: