Table of Contents
Advertisement
en Cookware test
Display
Setting
Volume of the audible signals
Assign one of the time-setting programme
functions to
→ "Time-setting options", Page 11
Power limitation
This enables you to limit the total power of
the hob, if required, due to the circum-
stances of your electrical installation. Ob-
serve the regulations of the local electricity
suppliers. The available settings depend on
the maximum power of the hob. You can find
more information on the rating plate. If the
function is switched on and the hob has
reached the set power limit, the required and
permitted power level flashes and you can-
not select a higher power level.
Demo mode
Demonstration mode for the hob: When you
switch on the hob,
seconds and the cooking zones do not heat
up.
Cookware test
You can use this function to test the quality
of the cookware.
→ "Cookware test", Page 16
-
Hob-based hood control
The settings are configured based on the ex-
tractor hood model.
Restoring factory settings
1
Factory setting
20.2 To go to the basic settings
Requirement: The hob must be switched off.
To switch on the hob, touch
1.
Within the next 10 seconds, touch and hold
2.
seconds.
Product information
Customer service directory
Production number
Production number 1
Production number 2
a The first four displays provide the product informa-
tion. Touch
to view the individual displays.
Cookware test
21 Cookware test
The quality of the cookware has a major influence on
the speed and the result of the cooking process.
You can use this function to test the quality of the cook-
ware.
Before the test, ensure that the diameter of the cook-
ware base corresponds to the diameter of the cooking
zone being used.
Access is via the basic settings. → Page 15
16
on the control panel.
lights up for a few
.
for 4
Display
Value
- Quiet.
1
- Medium.
– Loud.
1
- Switch-off timer.
- Timer.
The power is increased by 500 W with each level.
– Switched off. Maximum power of the hob
- 1000 W. Lowest power setting.
. - 1500 W.
...
- 3000 W.
. - 3500 W.
- 4000 W.
. - 4500 W.
...
- Maximum power of the hob.
1
- Switched off.
- Switched on.
- Not suitable.
- Not optimal.
- Suitable.
→ "Overview of the hood control settings", Page 19
1
- Individual settings
.
- Factory settings.
Touch
to access the basic settings.
3.
and light up as a presetting.
a
4.
Touch
repeatedly until the desired setting ap-
pears.
Select the required setting in the settings area.
5.
6.
Touch and hold
a This saves the settings.
20.3 Discarding changes to the basic
settings
Touch
.
▶
a All changes are discarded and not saved.
21.1 Carrying out Cookware test
Requirement: As a single cooking zone, the flexible
cooking zone is set in such a way that only the indi-
vidual item of cookware is checked.
1
.
for 4 seconds.
Advertisement
Table of Contents
