Table of Contents
Advertisement
Operating the appliance
en
Manual hood control
You can control the ventilation setting manually.
Using tall items of cookware may prevent the
Note:
extraction system from working at optimum power. The
extraction power can be improved by placing a lid on
the cookware at an angle.
Activation
Touch the
symbol.
:
1.
The ventilation system starts at the preset power
level.
Within the next 10 seconds, select the required
2.
power level in the settings area.
The power level that is selected is displayed in the
settings area.
Touch the
symbol to confirm the selected setting.
:
3.
The ventilation system switched on.
Changing and switching off
Touch the
symbol and select the required power
:
level or set it to
‹
in the settings area.
Intensive setting
There are two intensive modes for the ventilation
system. If you activate the intensive settings, the
ventilation system works at maximum output for a short
time.
Activation
Touch the
symbol and select the required intensive
:
setting.
Intensive setting I : Touch the
■
above the symbol lights up. The intensive setting is
activated.
Intensive setting II: Touch the
■
line above the symbol flashes. The intensive setting
is activated.
After eight minutes, the appliance automatically
Note:
switches back to fan setting
Changing and switching off
Touch the
symbol and select the required power
:
level or set it to
in the settings area.
‹
Automatic start
If you select a power level for a cooking zone, the
automatic start switches on.
The hob comes with sensor-controlled automatic start
as standard. You can find out how to change this
setting in section ~ "Basic settings".
Automatic start with sensor control
The air quality sensor registers the cooking vapours
automatically, selects the optimum power level, and the
line above the
symbol lights up.
w
18
symbol. The line
á
symbol twice. The
á
.
Š
Automatic start via power levels
The ventilation system switches on at a power level in
accordance with the respective power level for the
cooking zone.
Automatic mode with sensor control
The hob has an air quality sensor that automatically
registers the cooking vapours and switches on the
ventilation system.
If the automatic start is switched off or is set in
accordance with the power levels, you can switch on
operation with sensor control manually at any time.
Activation
Touch the
symbol. The line above the symbol lights
w
up more brightly and the optimum power level is set
automatically with the help of the sensor.
Deactivating
Touch the
symbol. The line above the symbol goes
w
out. The sensor control is switched off.
You can find out how to set the sensor sensitivity
Note:
in section ~ "Basic settings".
Run-on function
The run-on function allows the ventilation system to
continue operating for a few minutes after the hob has
been switched off. This removes any remaining cooking
vapours. The ventilation system then automatically
switches off.
The hob is supplied as standard with the run-on time
with a maximum switch-off time. You can find out how to
change this setting in section ~ "Basic settings".
Activation
The run-on time is possible depending on the
configured basic settings:
Via the control for the air quality sensor. The
■
symbol lights up.
With a maximum switch-off time. The
■
lights up.
The run-on function only switches on if at least
Note:
one cooking zone has been switched on for at least one
minute.
Deactivating
Manual
Touch the
or
symbols. The run-on function is
:
w
switched off.
Automatic
The run-on function is switched off in the following
cases:
The run-on time has elapsed.
■
The appliance is switched on again.
■
The sensor ensures that the air quality is in order.
■
w
symbol
:
Advertisement
Table of Contents
