thomann Millenium MPS-750X User Manual page 35

Parameter Function
Xtalk
Note Send
Rim Velocity
Pedal Vel.
Calib.
Split Point
If several pads are mounted on a rack vibrations can be transmitted to other pads when you
hit a trigger and unintentionally trigger sounds. This crosstalk can be avoided by the appro‐
priate setting. The value should be set as low as possible.
Preset for the MIDI note value which is sent in MIDI operation.
This parameter regulates the volume behaviour of the rim trigger regardless of the actual
strike intensity. The higher the value, the higher the volume when playing the rim trigger, and
vice versa.
This parameter regulates the volume behaviour of the hi-hat pedal regardless of the actual
strike intensity. The higher the value, the higher the volume when stepping on the hi-hat
pedal, and vice versa.
This parameter defines the playing range of the hi-hat pedal. Fully depress the connected
pedal several times and let the pedal slowly move back to the highest position. The value
range is stored in the module and allows a more precise strike.
This parameter defines the Rim trigger response value of the snare. If you play the Rim trigger
of the snare softly you hear the Cross Stick sound. Above the response value you hear the Rim
Shot sound.
MPS-750X
Operating
35