Advertisement
Use the woodburning pen only for poker
work on untreated wood, leather or cork,
or as a thermal cutter for materials such
as polystyrene and PVC. Do not use the
woodburning pen on materials with a
lacquered surface.
The manufacturer shall not be liable for
damage resulting from misuse of the
machine or unauthorised alterations.
WARNING!
Fire and explosion hazard!
Risk of burns
The soldering tip heats up during
operation and if not handled properly can
result in burn marks, dimples and at
worst, burn wounds.
Do not touch the hot soldering tips and
„
keep them away from inflammable
objects.
Keep explosive and flammable objects
„
well away from the device.
Always place the soldering tool in the
„
safety holder provided. Make sure the
safety holder is stable.
Wear appropriate protective clothing to
„
protect yourself against burns. Protect
your eyes by wearing eye protectors.
Do not use the soldering tool in a damp or
wet environment.
Make sure the room is well ventilated
when using the product.
Before use check machine, cable, and
plug for any damages or material fatigue.
The soldering tool must be operated only
in perfect technical working order.
Have damaged parts repaired by a
specialist.
If the power cord of the power tool is
damaged, it cannot be replaced; the
power tool must be disposed of.
The mains cable must only be plugged
into the mains socket or adapter approved
ES
Datos Técnicos
Consumo de potencia
Tensión de red
Rango de temperatura
Advertencias de seguridad
Antes de poner en
funcionamiento el aparato y de
comenzar a trabajar con él leer
completamente las presentes
instrucciones y las normas de seguridad.
Conservar las presentes instrucciones en
un lugar accesible para todos los
usuarios.
Usar el soldador para grabar
exclusivamente para grabaciones
artísticas sobre madera, cuero o corcho
natural sin tratar, así como para cortar en
caliente materiales como poliestireno y
PVC. No usar este soldador para
materiales lacados.
El fabricante no se responsabiliza en
caso de una utilización diferente a la
prevista en el manual de instrucciones ni
en caso de modificación del aparato por
cuenta del usuario.
for this purpose. Check that the mains
voltage is compatible with the connected
load of the soldering iron. Avoid
unintentional operation. Disconnect the
soldering tool from the power supply while
not in use.
Do not use the cable for purposes other
than those for which it is intended.
Maintenance and repair
Before doing any work on the machine,
pull the plug out of the socket. Follow the
instructions on soldering tip replacement.
Use original replacement parts only.
Always have your soldering tool repaired
by a qualified electrician. For more
information please visit
www.apextoolgroup.eu.
Warranty
Weller supplies this device with a
warranty valid for two (2) years from the
date of purchase. The warranty relates to
material and manufacturing defects and
covers both replacement parts and
labour. The warranty shall be void if
damage is due to improper use and if the
device has been tampered with by
unauthorised persons.
This device conforms to the specifications
of the EC Declaration of Conformity with
Directives 2004/108/EC, 2006/95/EC and
2011/65/EU (RoHS).
Disposal
on waste electrical and electronic
equipment and its implementation in
accordance with national law, electric
tools that have reached the end of their
life must be collected separately and
returned to an environmentally compatible
recycling facility.
¡Reservado el derecho a realizar modificaciones técnicas!
La punta de soldar se caliente durante su
funcionamiento y si se manipula
inadecuadamente podría causar daños,
quemaduras e incluso lesiones.
„
„
„
„
Do not dispose of electric tools
together with household waste
material! In observance of
European Directive 2012/19/EU
WHK30EU
UK / CH / ZA
30 W
230 V ~ 50 HZ
200°C - 595°C
¡ADVERTENCIA!
Peligro de incendio y
explosión!
Riesgo de quemaduras
No toque las puntas de soldadura
calientes y manténgalas siempre
alejadas de objetos inflamables.
Mantener alejados los objetos
explosivos o inflamables.
Colocar siempre el soldador en el
soporte de seguridad adjunto.
Asegurarse de que el soporte de
seguridad esté siempre sobre una base
estable.
Usar ropa protectora adecuada para
protegerse de posibles quemaduras.
Proteger los ojos con unas gafas
protectoras.
Español
Advertisement
