Dab Mode - Blaupunkt BREMEN SQR 46 DAB Operating Instructions Manual

Hide thumbs Also See for BREMEN SQR 46 DAB:
Table of Contents

Advertisement

Volume | DAB mode
Switching on/off via vehicle ignition
The car sound system will switch off/on simultaneously with the ignition
if the device is correctly connected to the vehicle's ignition as shown in the in-
stallation instructions and you did not switch the device off by pressing the
On/Off button.
BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB
Volume
Adjusting the volume
You can adjust the volume in steps fron 0 (off) to 50 (maximum).
Turn the VOL control to change the Volume.
Note:
If a telephone is connected with the car sound system as described in
the installation instructions, the car sound system is muted in case
of a phone call. During muting, the display shows "TELEPHONE".
Muting the car sound system (Mute)
Briefly press the On/Off button to mute the car sound system or to
reactivate the previous volume. While it is muted, the display shows
"MUTE".
Traffic information
In the reception area "EUROPE", an FM station can identify traffic reports by
means of an RDS signal. If priority for traffice reports is swiched on, a traffic
report is automatically switched through, even if the car sound system is
currently not in radio mode.
If priority is switched on, the display shows the traffic jam symbol (
"TRAFFIC" is displayed during a switched-through traffic announcement.
The priority is activated and deactivated in the user menu (see the chapter
"User settings", section "Making settings in the "TUNER" menu", menu item
"TRAFFICINFO").
Note:
The volume is increased for the duration of the switched-through
traffic announcement. You can adjust the minimum volume for traffic
5
36
AUTORADIO
announcements (see the chapter "User settings", section "Making
settings in the "VOLUME" menu", menu item "TRAFFIC VOL").
To cancel a switched-through traffic announcement, press the
button.

DAB mode

With DAB, you can enjoy radio in digital sound quality. In contrast
with standard radio broadcasting, several programmes (services) are
always broadcast over the same frequency for DAB. These services are
combined into a so-called ensemble. In some cases, the same service
can be received in different ensembles.
Note:
Bedienungsanleitung
You will need a special DAB antenna to be able to receive DAB
signals. This can be a separate DAB roof/ window antenna or a DAB/
Operating instructions
AM/FM combination antenna.
Changing to DAB mode or selecting a DAB memory bank
Press the DAB+ button repeatedly until the desired DAB memory bank
is displayed: DAB1 >DAB2 >DAB3. If D AB mode is switched on, the
display showsthe symbol
Notes:
Up to 5 services can be stored in each DAB memory bank.
Gebruiksaanwijizing
DAB memory banks can be activated or deactivated via the user menu
(see the chapter "User settings", section "Making settings in the
"DAB TUNER" menu, "PRESETS" menu item). Deactivated DAB
).
memory banks are skipped during the source selection with the
SRC button .
Tuning into ensembles/services
With DAB, several services broadcast over the same frequency are
always combined into an "ensemble".
Mode d' emploi
Istruzionl of uso
Bruksanvisining
5

Advertisement

Table of Contents
loading

Table of Contents