Maintenance Instructions; Annual Maintenance; Energy Saving Tips - Whirlpool ACU124PK0 Installation Instructions And Use & Care Manual

Through-the-wall air conditioner
Table of Contents

Advertisement

Maintenance Instructions

Annual maintenance

WARNING
Electrical Shock Hazard
Disconnect power before doing any
maintenance.
Do not drink water collected by the air
conditioner.
Failure to follow these instructions can
result in death, electrical shock, or sickness.
WARNING
Excessive Weight Hazard
Use two or more people to move and install
air conditioner.
Failure to do so can result in back or
other injury.
Your air conditioner needs annual maintenance
to help ensure steady, top performance through-
out the year.
Call the service company recommended by
your dealer to:
Inspect and clean the coils and condensate
water passages.
Check fan.
The compressor and fan motor are sealed and
need no oiling. The expense of an annual
inspection is the customer's responsibility.
OR
If you are familiar with electrical appliances, you
can do the cleaning and maintenance yourself.
If you choose to do so, follow these steps:
1.
Unplug air conditioner or disconnect power.
2.
Remove the air conditioner from the sleeve.
See pages 7-8.
3.
Remove the front panel. See page 12.
4.
Remove the screws from the top and sides of
the cabinet, and then remove the cabinet.
Watch out for the sharp metal fins on the front
and rear condenser coils.
5.
Wrap the motor, electrical control box, and
compressor terminal box in plastic film to make
sure no water or other liquid gets inside. Water
or other liquids could damage the insulation
and cause serious mechanical problems.
6.
Clean and hose out the base, coils, and
condensate pan. Clean at least once a year,
or more often if the condenser coils and pan
collect dirt, sand, leaves, insects, or algae.
Also, clean if you detect an odor coming from
the air conditioner.
7.
Remove the plastic film from the motor and
electrical parts.
8.
Reattach the cabinet with the screws. Replace
the front panel, and reinstall the air conditioner
in the sleeve.
NOTE:
It is a good idea to wait 24 hours before
starting the air conditioner again. This allows time
for all areas to dry out. The water from rainfall or
from normal operation does not harm these
components.
9.
Plug in air conditioner or reconnect power.

Energy saving tips

Improve home insulation. Seal doors, windows,
and close fireplace flue.
Close blinds or drapes on sunny side of house.
Add window awnings.
Keep air filter clean. Do not block airflow with
drapes or furniture.
Ventilate attic (high temperature levels add to
normal cooling load).
Try not to use heat producing appliances during
the hottest part of the day. Turn lights, radios,
televisions, and other appliances off when not
needed.
Keep heat registers and cool air returns closed
or blocked off so cooled air won't escape.
Use a vent fan in cooking, laundry, or bathing
areas to pull out heat and moisture near its source.
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents