Mechanical Mounting - SAFEasy SF2 Series Instruction Manual

SF2 Series Instruction Manual

3. MECHANICAL MOUNTING

The emitting (TX) and receiving (RX) units must be installed with the
relevant sensitive surfaces facing each other.
The connectors must be positioned on the same side and the distance
must be included within the operating range of the SF2 light curtain
(see section 9 "Technical data").
Once positioned the two units, the two bars should be aligned and
parallel as much as possible.
The next step, if necessary, is the fine alignment, as shown in section
5 "Alignment procedures".
Fig. 12
16