Permobil R-net LCD User Manual page 66

R-net LCD (CJSM2)
2. Go into seat mode by using the mode button on the joystick or
Omni display. If the control panel does not have a mode button,
use the left paddle switch for mode selection. A switch plugged
into the 1/8" monojack port of the joystick or Omni display can
also be used for mode selection.
3. If the control panel is an Omni programmed for switched driver
controls, continue from step 6.
66
Figure 67. Various ways to access modes.
ConnectMe