Permobil R-net LCD User Manual page 29

R-net LCD (CJSM2)
2.5.1 General
When a wheelchair is delivered equipped with a control panel
containing Bluetooth®, the Bluetooth® functions are pre-
programmed to a basic setup. This setup is described below.
The basic setup is prepared for pairing of up to four Bluetooth®
devices, two PC mouse devices or Android™ devices and two
iDevices®, without any additional tools. The setup can be
reprogrammed using a programming key and an R-Net programmer
installed on a computer. With this equipment, it is possible to e.g.
rename or replace text and icons describing a certain device, activate
mouse commands, nudge time, change the cursor speed etc.
2.5.2 Pairing with devices
A device must be set to On from the Settings Menu before it can be
paired. Follow the description below.
R-net LCD control panel
29