Advertisement
TEMBLOR SPEAKER | USER MANUAL
PRODUCT OVERVIEW
1. Wireless charging area
2. Micro USB charging port
3. Wireless charging LED indicator
PRODUCT FEATURES
• Wireless functionality with a 33 ft (10 m) range
• Compatible with smartphones and other media devices
• Built-in rechargeable battery
• Wireless charging functionality
WIRELESS CONNECTION
1. Slide the Power switch ⑥ on the bottom of the Temblor to power it on.
2. Activate wireless pairing on your media device.
3. Select "Temblor Speaker" from your list of devices.
4. Connect and control your music with your mobile phone/tablet/computer.
CONNNECT VIA AUX CABLE
1. Insert the aux cable (not included) into the aux jack ⑤ and connect to your mobile
phone/tablet/computer.
2. Control your music with your mobile phone/tablet/computer.
1
5
2
3
4
4. Charging / Wireless connection status LED indicator
5. AUX jack
6. Power ON/OFF
6
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Origaudio TEMBLOR SPEAKER
Summary of Contents for Origaudio TEMBLOR SPEAKER
- Page 1 1. Slide the Power switch ⑥ on the bottom of the Temblor to power it on. 2. Activate wireless pairing on your media device. 3. Select “Temblor Speaker” from your list of devices. 4. Connect and control your music with your mobile phone/tablet/computer.
- Page 2 1. Plug the provided charging cable into the micro USB port and connect to a power source on the other end. The LED indicator light ④ will blink red, signaling that the Temblor speaker is charging. Charging your phone wirelessly with the Temblor speaker: NOTE: Before attempting to charge your phone, make sure it is wireless charging-compatible.
Need help?
Do you have a question about the TEMBLOR SPEAKER and is the answer not in the manual?
Questions and answers