Hints For Ironing; Technical Data - PROFILO PSI21600 User Manual

Table of Contents

Advertisement

Available languages

Available languages

Never direct the steam to human or
pets.
The iron must not be left unattended
while it is connected to the supply
mains.
CAUTION!
Not observance can result in
damage to possessions
Remove any protective films or stickers from the sole
plate and the cabinet.
Unwind and straighten the power cord before usage.
Fill the water using included vessel for water.
Keep the power cord away from the soleplate.
Make sure that the voltage on the rating plate
corresponds to that of your power grid.
Always connect the iron to a suitable mains supply
outletm (AC only), with grounding, which voltage
complies with the voltage indicated on the appliance
nameplate.
Do not use an extension power cord set without
grounding!
Do not add perfume, vinegar or other chemical liquids
into the water tank; they can damage the appliance
seriously.
Do not immerse the appliance in water or any other
liquid.
Do not wrap the power cord around the unit for storage
until it has cooled down completely.
Do not attempt to open the cabinet or dismantle any
parts from the appliance.
The appliance is not intended to be operated by means
of an external timer or separate remote-control system.
If you do not use the iron, even for short time, switch it
off, turning Temperature Dial in anti-clockwise direction
to "MIN".
If you are not going to use the iron even for a short
period of time, turn off the steam function by setting the
steam control to
Use "SELF CLEANING" function at least once a month.
SUGGESTION
Information on the product and
suggestions for its use
The iron is intended for domestic usage only and you
can use it solely according to herewith manual.
PSI21600-001_v01
position.

Hints for ironing

1 Sort out the articles to be ironed according to the type
of fabric. This will minimize the frequency of temperature
adjustment for different garments.
2 Test ironing a small area on the backside or inside the
garment if you are unsure about the type of fabric. Start with
a low temperature and increase gradually.
3 Wait for about three minutes before ironing heat sensitive
fabrics. Temperature adjustment needs certain time to reach
the required level no matter it is higher or lower.
4 Delicate fabrics such as silk, wool, velour, etc. are best
ironed with an ironing cloth to prevent shine marks.
5 You may need a few times of press to activate the spray,
burst and vertically burst function.
6 Read the garment labels and follow the manufacturer's
ironing instructions which are often shown by symbols
similar to the following:
Temperature settings
Acetate
Elastics
Polyester
Silk
Triacetate
Cotton
Linen

Technical data

The iron technical parameters are included at the name plate.
PSI21600, PSI23600: 220-240V V, Power: 2000 W ÷ 2400 W.
Water tank nominal capacity: 300 ml.
PSI27600:
220-240V, Power: 2300 W ÷ 2700 W.
Water tank nominal capacity: 300 ml.
Sole plate – ceramic.
The iron is I class appliance, equipped with supplying cord
and plug with grounding.
PROFiLO iron meets the requirements of effective standards.
This device complies with Commission Regulation (EC)
no. 1275/2008 on eco-design requirements.
The appliance meets the requirements of the following
directives:
– Electrical equipment designed for use within specific
voltage limits (LVD) – 2006/95/EC.
– Electro-Magnetic Compatibility (EMC) – 2004/108/EC.
The product is marked with
Polyamide
Polypropylene
Viscose
Wool
symbol on the name plate.
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Psi23600Psi27600

Table of Contents