Toshiba dynadock 4K User Manual page 16

16
Introduction
Component
USB 3.0 ports
Network port
HDMI™ Out
port
DisplayPort™
DVI-I video Out
port
USB 3.0 Type
B connector
DC-IN
Description
Connection points for USB 3.0, 2.0, or
1.1 devices.
Note 1: Certain USB devices, such as
optical disk drives and hard disk drives,
have high power requirements. Due to
the power output limitations of the USB
ports, you may not be able to operate
more than one such device at a time.
Note 2: If your USB device came with an
AC adaptor, be sure to connect the
device to a power outlet with the AC
adaptor.
Ethernet cable (not provided)
connection point.
Connection point for the HDMI™ Out
port with a Type A connector HDMI™
cable (supports video and sound
output).
Note: To use this port, you must slide
the cover to the down position. Only one
display port can be used at a time.
Connection point for the DisplayPort™
(supports video and sound output).
Note: To use this port, you must slide
the cover to the up position. Only one
display port can be used at a time.
Connection point for a DVI display, or a
VGA display with use of the included
DVI-I to VGA adaptor.
Note: To use this port, you must slide
the cover up or down. Only one display
port can be used at a time.
Connects the dynadock 4K docking
station to the computer (type B to type
A cable provided).
Socket for AC adaptor (provided).
Note: The dynadock 4K docking station
requires an external power supply, as it
does not draw power from the
computer's USB bus.