Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Digisol DG-WR3001NE
Summary of Contents for Digisol DG-WR3001NE
- Page 1 802.11n 300Mbps Wall Mount Wireless Repeater DG-WR3001NE V1.0 2018-04-04...
- Page 2 Copyright Copyright © 2018 by DIGISOL Systems Ltd. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of this company.
- Page 3 For Charging Devices , Output Upto 5V-0.5A Ethernet port For connecting Ethernet Enabled Devices NOTE : You must reset DG-WR3001NE to factory default settings first (press reset button for 10seconds) , only incase if you have done some settings before.
- Page 4 AP/Repeater, wirelessly. 1. Click Start > Control Panel > Network and Sharing Center, click Change adapter settings, right-click Wireless Network Connection, select Connect/Disconnect. 2. Select the SSID or Wireless name "DIGISOL" then click Connect.
- Page 5 Method-1 : Just Press the WPS button on the Main router or Root AP and immediately press the WPS button on the DIGISOL extender (DG-WR3001NE) for 2 to 3 seconds, then a wireless connection will be established automatically between both Main Router and Extender.
- Page 6 Note : If you want to setup the Extender Mode again, then you must reset it to factory default setting by pressing reset button upto 10 seconds). For further help ,Please call on 1800 209 3444 for toll free support or write to helpdesk@digisol.com...
- Page 8 DIGISOL SYSTEMS LIMITED L-7, Verna Industrial Estate, Salcete, GOA - 403722 Digisol is a Subsidiary of Smartlink Network Systems Ltd. www.digisol.com 1800 209 3444 helpdesk@digisol.com sales@digisol.com...
Need help?
Do you have a question about the DG-WR3001NE and is the answer not in the manual?
Questions and answers