How To Mount Shoulder Strap - Deepace KC901V Manual

Step 3: lift the upper shell lightly, and then turn it around to the left side.
Step 4: Install the batteries. Batteries' positive poles should be heading toward
the RF adapter. If there are only two batteries be installed, install them separately to
the most left side and the most right side. (Chart 1-3)
Step 5: Check the data cable adapter. If there is any deviation, set them well
again.
Step 6: Put the shells back together again with the opposite steps mentioned
above. Then press the POWER button to turn on the power to perform a functional
check. If there is no any abnormal situation, set the screws on it again.

1.3 How to Mount Shoulder Strap

There are both mounting installing holes on the instrument's upper part and
bottom part (behind RF port). So you can carry the instrument either with the RF port
upward or with it downward. If you need to carry it around, using it with the strap
mounted on the bottom is preferred.
Unfold the strap and take it out the plastic fasteners from it. Then thread it
through back to the mounting points and lock it tight in the plastic fasteners.
Chart 1-3 Batteries' direction and installation steps
- 6 -