Cleaning The Slide-Out Air Filter - Whirlpool AC0052 Use And Care Manual

Cleaning the slide-out air filter
The filter is cleanable. A clean filter helps remove
dust, lint and other particles from the air. Check
every two weeks to see if filter needs cleaning.
1. Remove filter by sliding it up and out the top of
the front panel.
2. Clean filter using a vacuum cleaner.
OR
If very dirty, wash filter with warm water and
mild detergent. Air dry thoroughly before
replacing.
3. Replace filter by sliding it back down into
opening at top of front panel.
Performing annual maintenance
Your air conditioner needs annual maintenance
to help ensure steady, top performance through-
out
the year.
Call the service company recommended by
your dealer to:
l
Inspect and clean the coils and condensate
water passages. 7
l
Check fan and fan motor.
The compressor is sealed and needs no oiling.
Expense of annual inspection is the customer's
responsibility.
OR
If you are familiar with electrical appliances, you
can do the cleaning and maintenance yourself. If
you choose to do so, follow these steps.
Electrical Shock, Product Damage and
Personal Injury Hazard
l
Unplug power cord from receptacle before
performing any maintenance. Be sure no
liquid gets into the motor, electrical control
box or compressor electrical terminals.
l
Do not lift, push or pull any white beaded
foam (expanded polystyrene) parts.
l
Because your air conditioner weighs from 50
to 70 pounds, it is recommended that you
have someone help you when you remove
and re-install your unit and that you both use
proper lifting techniques.
l
Handle the air conditioner with care. Watch
out for the sharp, metal fins on the front and
rear coils.
l
Do not use the collected water for drinking
purposes. It is not sanitary.
Failure to follow the above precautions could
result in electrical shock, product damage or
oersonal injury.