Charging the Device ..............8 Device maintenance ............8 Garmin Support Centre ............... 8 Updating Software Using a Wi‑Fi Network ......... 8 Updating Software with Garmin Express™ ........ 8 Updating the Camera Software ..........9 Device Care ................9 Restarting the Device ..............9 Removing the Device, Mount and Suction Cup ......
(Updating Software Using a Bare Wire USB Cable ‑ Fi Network, page WARNING Garmin strongly recommends having an experienced installer Installation with the proper knowledge of electrical systems install the device. Incorrectly wiring the power cable can result in damage Installing the Magnetic Mount in Your to the vehicle or the battery and can cause bodily injury.
Verify the line on the outer rim of the filter is facing up and Position the mount over the mounting location. the Garmin logo is right side up. TIP: the adhesive is extremely sticky. Avoid touching the adhesive to the windscreen until the mount is properly positioned.
3.5 mm audio jack ventilation, and air conditioning and other items when drilling pilot holes and attaching the mount to the vehicle. Garmin is not Magnetic mount interface with 14-pin connector responsible for any damages or consequences arising from the installation.
Memory card slot with pre-installed microSD ® card (under cover) Select an option: • If the device prompts you to sign in to Garmin Connect, Using the Touchscreen select Sign In or Create a New Account. • Tap the screen to select an item.
Record Camera Audio: enables or disables camera audio Adding a Track recording for drive session videos. You can add a track that is not already loaded on your device. Audible Prompts: sets the level of audio coaching feedback The device uses your GPS location and your vehicle's and audible prompts you receive during a drive session movements to create a map of the track.
Select Done. Comparing Sessions You can compare the results of two drive sessions. This can Selecting a Car or Driver Profile help you to see areas of improvement between two sessions. From the home screen, select the race profile icon (Home From the session summary screen, select >...
Enabling Bluetooth wireless technology Select > Bluetooth. Pairing a wireless headset or car stereo Place your headset and your Garmin Catalyst device within 33 ft. (10 m) of each other. On your Garmin Catalyst device, select > Bluetooth. On your Garmin Catalyst device, verify Bluetooth wireless technology is enabled.
The small end of the cable connects to the micro-USB port • Connect the device to an optional power adapter accessory, on your Garmin Catalyst device and the large end connects such as a wall power adapter. to an available USB port on your computer.
• Remove the residue left on the windscreen by the suction Select an option: cup. • To view the system requirements and verify the Garmin • Do not keep your unit in the glove compartment. Express application is compatible with your computer, •...
My camera feels warm while it is operating using the FAT32 file system. NOTE: formatting the memory card deletes all data on the card. Garmin cameras are designed for the automotive environment. It is normal and expected for the products to become warm or Select >...
Select Edit > Copy. Browse to a folder on the device. NOTE: for a removable drive or volume, you should not place files in the Garmin folder. Select Edit > Paste. Disconnecting the USB cable If your device is connected to your computer as a removable drive or volume, you must safely disconnect your device from your computer to avoid data loss.
Need help?
Do you have a question about the CATALYST and is the answer not in the manual?
Questions and answers