Time-Setting Options - Bosch HKK99V85.M Manual

Free standing cooker
Table of Contents

Advertisement

Open the appliance door carefully.
1.
Pull the rotisserie spit rack with the metal frame to the left and
2.
out of the motor adaptor.
Pull the rotisserie spit rack out of the oven as far as possible.
3.

Time-setting options

Setting the clock
Once the appliance has been connected to the mains or after a
power cut, the "A" symbol and "12:00" will flash in the display.
The current time must be set in order for the oven to be
switched on.
Press the "+" and "-" buttons at the same time or just press
1.
the "Mode" button. The
Û
Setting mode is active once the
Use the "+" and "-" buttons to set the current time.
2.
If the buttons are not pressed for a long time, the symbols will
stop flashing and the display will show the set time.
Note: The function selector, the temperature selector and the
clock must be set before using the oven. Otherwise the oven
will not switch on.
Button lock
The digital timer has an automatic button lock. If the timer is
inactive for more than 10 seconds, the button lock is activated
automatically. To disable the button lock, press and hold the
"Mode" button for 2 seconds.
Setting the timer
The timer has no effect on how the oven works. The timer can
be set between 1 minute and 23 hours and 59 minutes.
Press and hold the "Mode" button for 2 seconds to disable
1.
the button lock. The
V
Use the "+" and "-" buttons to set the required time. If the
2.
buttons are not pressed for a long time, the symbols will stop
flashing and the display will show the current time.
An audible signal will sound once the time has elapsed.
3.
Press the "Mode" button to switch off the timer.
14
T i m e - s e t t i n g o p t i o n s
symbol will appear in the display.
Ú
symbol starts flashing.
symbol will flash in the display.
Hold the rotisserie spit on the right-hand side with a pot
4.
holder and screw the grill onto the rotisserie spit.
Carefully lift the rotisserie spit off the rotisserie spit rack.
5.
Remove the rotary spit rack and the baking tray from the
6.
oven.
Semi automatically programming the cooking time
A different cooking time can be set for each item of food in the
oven. The oven will switch off automatically at the end of the
cooking time. This means that you do not have to stop what
you are doing to switch off the oven, and prevents the food
from accidentally being cooked for too long.
Use the function selector to set the type of heating.
1.
Use the temperature selector to set the temperature.
2.
Press and hold the "Mode" button for 2 seconds to disable
3.
the button lock.
Press the "Mode" button repeatedly until "dur" appears in the
4.
display. When "dur" appears, indicator "A", "00:00" and the
symbol will flash in the display.
z
Use the "+" and "-" buttons to set the cooking time.
5.
Once this has been set, the current time, the "A" symbol and
6.
the
z
symbol will light up permanently in the display. The
oven heats up.
End of the cooking time
An audible signal will sound once the set time has elapsed.
Use the "Mode" button to switch off the timer.
Semi automatically programming the switch-off time
This function is used to continue cooking until the switch-off
time is reached. The oven will switch off automatically at the
end of the cooking time. This means that you do not have to
stop what you are doing to switch off the oven, and prevents
the food from accidentally being cooked for too long.
Use the function selector to set the type of heating.
1.
Use the temperature selector to set the temperature.
2.
Press and hold the "Mode" button for 2 seconds to disable
3.
the button lock.
Press the "Mode" button repeatedly until "end" appears in the
4.
display. When "end" appears, indicator "A", the current time
and the
z
symbol will flash in the display.
Use the "+" and "-" buttons to set the end of the cooking time.
5.
Once this has been set, the current time, the "A" symbol and
6.
the
symbol will light up permanently in the display. The
z
oven heats up.
End of the cooking time
An audible signal will sound when the set time has been
reached. Use the "Mode" button to switch off the timer.

Advertisement

Table of Contents
loading

Table of Contents