NavePoint Basic Series Owner's Manual

NavePoint Basic Series Owner's Manual

Wall-mount cabinet
Hide thumbs Also See for Basic Series:

Advertisement

OWNER'S MANUAL: Basic Series Wall-mount Cabinet
THIS MANUAL APPLIES TO THE FOLLOWING SKUs: 00301003, 00301004
Keep this information for further reference.
Thank you for purchasing a NavePoint product. If you have any questions regarding the installation or use of your product, please call
us at 888.505.1363.
Please examine the product for any damaged parts. If any part is damaged or missing, contact NavePoint for assistance. Do not
attempt to install or use product if it has been damaged.
During installation, lay product contents on cardboard or other protective surface to avoid any damage.
Improper installation or use of this product could result in damage to the product, other equipment, or personal injury. It is
recommended that installation be performed by a qualified installer. NavePoint cannot be held responsible for damage to equipment or
personal injury resulting from improper use or installation of product. If product is intended to store/mount equipment, please ensure the
equipment stored/mounted does not exceed the specified weight capacity.
Limitations of Liability: In no event will NavePoint, LLC. be liable for any damages, whether direct or indirect, special, punitive,
incidental or consequential damages (including, but not limited to, lost profits or revenue, loss of use, lost business opportunities or loss
of goodwill) or for the costs of procuring substitute products, arising out of or in connection with the use of the product, whether such
liability arises from any claim based upon contract, warranty, tort (including negligence), product liability or otherwise, whether or not
all causes of
seller has been advised of the possibility of such loss or damage. In no event will seller's total cumulative liability, from
action and all theories of liability, exceed the total amounts actually paid to seller by customer under the order that gives rise to any
liability hereunder.
© 2020 NavePoint, LLC
20200504-01

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Basic Series and is the answer not in the manual?

Questions and answers

Summary of Contents for NavePoint Basic Series

  • Page 1 THIS MANUAL APPLIES TO THE FOLLOWING SKUs: 00301003, 00301004 Keep this information for further reference. Thank you for purchasing a NavePoint product. If you have any questions regarding the installation or use of your product, please call us at 888.505.1363.
  • Page 2 2- Removable Side Panels (x2) 3- Fan Vents 4- Cable Access Punch-outs (x2) 5- Vertical Mounting Rails (x4) Hardware Included • M6 Mounting Screws x12 • M6 Plastic Washers x12 M6 Cage Nuts x12 • • Anchors x4 www.NavePoint.com customerservice@navepoint.com...
  • Page 3 2. Enclosure Configuration Door Locks The front door contains lock that is lockable with the included keys. Cable Access and Management The top/bottom of the cabinet has rectangular punch-outs for cable access and management. www.NavePoint.com customerservice@navepoint.com...
  • Page 4 Warning: Do not attempt to mount to wall, when equipment is already mounted inside the rack. The rack can hold up to 110 pounds evenly distributed. Make sure the wall surface can hold both the weight of the cabinet and the rack-mounted equipment. www.NavePoint.com customerservice@navepoint.com...
  • Page 5 Repeat steps 1a and 1b until all required cage nuts are installed. 2 After installing the required cage nuts, use the included black mounting screws and cup washers to secure your equipment to the rack rail. Place the cup washers between the screws and the equipment mounting brackets. www.NavePoint.com customerservice@navepoint.com...

This manual is also suitable for:

0030100300301004

Table of Contents