Westinghouse SE 6000 Product Manual page 135

S 6: S A
ECTION YSTEM DMINISTRATION
Activate Code, Extension. Required. System code number for the type of action to be
performed. The extension applies to camera presets for pan and tilt, or image verification
when used with a Polaroid ID-4000 system. See table following this field description list.
Deactivate Code, Extension. Optional. If this task is to be automatically controlled by a time
coded event, enter the activate / deactivate code to be executed when the event time code
ends. See table following this field description list.
User Interactive. Conditional (applies to event times). A Y/N field to indicate if a timed task
can be cancelled by an operator.
A / D C
CTIVATE EACTIVATE
09 REQ MANUAL ACCESS
29 FORGIVE PASSBACK
41 MANUAL UNLOCK
45 MANUAL LOCK
46 TIME UNLOCK
56 BUILDING OPEN
57 BUILDING LIMITED
58 BUILDING CLOSED
70 DEACTIVATE OUTPUT
# Activate / Deactivate Code
71 ACTIVATE OUTPUT
80 Chain Task
# Activate/Deactivate Code
81 EXTENDED PROCESSING
89 SHUNT POINT
90 UNSHUNT POINT
91 REQUEST RESET DEVICE
92 REQUEST RESET KEYS
ODES
Request to perform manual access.
Request to forgive passback.
Unlock a sensor / lock for an unlimited time.
Lock a sensor /lock.
Unlock a sensor / lock for the amount of time specified by the
hardware settings, or, where applicable, by the amount of time in
the Unlock Time field of the reader entry screen.
Set building mode to OPEN
Set building mode to LIMITED
Set building mode to CLOSED
Turn off the specified output. Use this code if you are elsewhere
turning an output on for an unlimited time.
Explanation
Turn on a specified output for the amount of time shown in the Time
field on the point entry screen. If Time=0, the output will be on for
an unlimited amount of time, and you must turn it off with an a
deactivate output code.
Jumps to another group of task records and is used to consolidate
multiple task into a separate task.
Explanation
Instruct extended processing poller to process a transaction. Use
with elevator, parking control, VIP2, and poller transactions with a
point ID which matches the poller record for these functions.
Shunt a specified point.
Unshunt a specified point.
Perform a device reset for an applicable device.
Perform a key download for an applicable device.
6-11