Mazda 3 2020 Owner's Manual page 337

▼ Adjustable Speed Limiter (ASL) Display
The setting status of the ASL is displayed in the active driving display or the display in
the instrument cluster.
Indication on
multi-informa-
Status tion display/
active driving
Stand-by dis-
play
Setting display
Cancel display
Warning display
▼ Activation/Deactivation
NOTE
When the ignition is switched off, the
system status before it was turned off is
maintained.
For example, if the ignition is switched
off while the ASL is operating, the
system will be operable when the
ignition is switched ON the next time.
Activation
Press the LIM switch to activation the
system. The ASL screen is displayed,
and the ASL standby indication
displays in white.
display
Displays when the speed limiter switch is operated and the system
is turned on.
Turns off when the system is turned off.
Displays when the SET- or SET+ switch is operated and the speed is
set.
Displays when any of the following operations is done and the sys-
tem is temporarily cancelled.
CANCEL switch is operated

Accelerator pedal is strongly depressed

If the vehicle speed exceeds the set speed by about 5 km/h (3
mph) or more, the ASL display flashes.
The display flashes until the vehicle speed decreases to the set
speed or less.
A warning beep is activated at the same time as the warning dis-
play.
Refer to Speed Limiter Warning Beep on page 7-79.
Explanation
Deactivation
Press the LIM switch again to
deactivation the system. The ASL
screen is no longer displayed and the
ASL indication does not display.
When Driving
i-ACTIVSENSE
4-179