Mazda 3 2020 Owner's Manual page 304

Hide thumbs Also See for 3 2020:
Table of Contents

Advertisement

When Driving
i-ACTIVSENSE
(European models)
When switching to a passing lane
and operating the direction
indicator, the system provides more
acceleration automatically if it
determines that more acceleration is
required. Drive while being careful of
the road ahead because you could
approach the vehicle ahead too
closely.
Cancelling the system
When the following operations are
performed, the MRCC system is
cancelled, and the MRCC set
indication (green) switches to the
MRCC standby indication (white) at
the same time.
The CANCEL switch is pressed.
The brake pedal is depressed.
(Manual transmission)
The shift lever is in the reverse (R)
position.
(Automatic transmission)
The selector lever is in the P (Park), N
(Neutral), or R (Reverse) position.
Under the following conditions, the
MRCC cancel indication is displayed in
the multi-information display and a
single beep sound is heard.
The DSC has operated.
The Smart Brake Support (SBS) has
operated.
When travelling on a downslope for
a long period of time.
There is a problem with the system.
The vehicle speed decreases to less
than 25 km (16 mph).
4-146
(Manual transmission)
The shift lever is shifted to neutral
(N) for a certain period of time.
The clutch is depressed for a
certain period of time.
The engine stalls.
The front radar sensor cannot detect
target objects (during rain, fog, snow
or other inclement weather
conditions, or when the radiator
grille is dirty).
The parking brake is applied.
Any of the doors is opened.
The driver's seat belt is unfastened.
The operation frequency of the
braking by the MRCC control is high.
Resuming control
If the MRCC system is cancelled, you
can resume control at the previously
set speed by pressing the RES switch
and after all of the operation
conditions have been met.
NOTE
If the set speed is not indicated in the
display, the control does not resume
even if the RES switch is pressed.
Turning off the system
When the MRCC switch is pressed
while the MRCC is operating, the
MRCC turns off.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents