Advertisement
3-4 How to assemble with the Unit
Slightly insert the Rear Blade Unit into the Film Guide Section and set.
N.B. Rest assured of the combination of punched blade(4pcs)and guidance poles(2pcs)
Fix gently the Film Guide Section assembled with Rear Blade Unit with fixing screws(4pcs)
Then, attach the Blade Unit with fixing screws(2pcs) by pushing the Lever down.
Screws(4pcs)
Fix the Film Guide Section with fixing screws(4pcs) tightly while pushing the Lever down.
After assembling, fix the bottom of the Unit and adjust the Rear Blade Set by lifting the Lever
up and down several times.
You may feel tight first, but will become smooth shortly.
- 5 -
Advertisement
