Labokey 7200 Manual page 3

2-4 How to assemble with the Unit
Slightly insert the Front Blade Unit into the Film Guide Section and set.
Fix gently the Film Guide Section assembled with Front Blade Unit with fixing screws(4pcs)
Then, fix the Blade Unit with blade unit fixing screws(2pcs)by pushing the Lever down.
After fixing the Blade Unit, fix tightly the Film Guide Section with fixing screws(4pcs)
After assembling, fix the bottom of the Unit and adjust the Front Blade Set by lifting the Lever
up and down several times.
You may feel tight first, but will become smooth shortly.
３．
How to change the Rear Blade Unit
3-1 Prepare new Rear Blade Set(L720RB2A)
to replace with the one removed.
Removed Rear Blade Unit
Screws(4pcs)
Screws(4pcs)
New Rear Blade Set(L720RB2A)
- 3 -