Related Manuals for Morris MBH-16314
Summary of Contents for Morris MBH-16314
- Page 1 INSTRUCTIONS MANUAL Bathroom heater Model: MBH-16314 THANK YOU FOR PURCHASING OUR BATHROOM HEATER. BEFORE FIRST USE, PLEASE READ THE INSTRUCTIONS CAREFULLY, AND KEEP THEM FOR FURTHER REFERENCE.
-
Page 2: Important Safety Information
INTRODUCTION • Before using your new heater, please carefully read through the following instructions. • KEEP THIS BOOKLET IN A SAFE PLACE SO THAT YOU MAY CONSULT IT LATER. • After removing the packaging, make sure that the appliance is in good condition. •... - Page 3 • Switch off the appliance, then use handles (where provided) to change its position. • Do not operate with the cord coiled up as this could cause a buildup of heat, which could pose a hazard. • The use of an extension cord with this appliance is not recommended. •...
- Page 4 Overview： Towel rack fixing Main button Display screen Operate button Tower rack (Rotatable) Operation: • Before use, make sure that the towel rack fixing nut is tightened. • Rotate the towel rack down or up according to your needs. • Before use, make sure the product is well fixed on the wall. 1.
- Page 5 2. Press the F key on the product once, the product works in cold air and the display shows as image A (the digital tube displays "-"); press twice, the product works at low heat and the display shows as image B; press three times, the product has high heat work, the display shows as image C;...
- Page 6 Function operation (ONLY by remote control) Note: During the operation of the remote control, remote control transmitter must aim at remote control receiving area of product, avoid remote control ineffective 1. Press” “, the product enters into working status. See below image A Press ”...
-
Page 7: Set Temperature
Set temperature During working status, press “ / “,the display shows ” 23 “ as default. Press ” “ to set desired temperature (temperature range 10-49℃), press “ “ to confirm the setting. For example： The current ambient temperature is 15℃, when set temperature to 25℃, the display shows as below: If cancel the temperature setting, press the "... -
Page 8: Maintenance And Cleaning
Set open-window detection (ONLY by remote control): Press“ “，the product enters into working status. Heating for a moment until stable. ” by remote control, light “ / ℃“ will on; The temperature displays ”23”by default. Press ” Press” “ to set desired temperature. During open-window detection mode, once the ambient temperature drops 5-10℃ within 10 minutes, then the product will stop working within 30 minutes and enters into stand by mode. - Page 9 Model identifier(s): MBH-16314 Item Symbol Value Unit Item Unit Heat output Type of heat input, for electric storage local space heaters only (select one) Pnom [no] Nominal heat manual heat charge control, with integrated output thermostat Pmin [no] Minimum heat...
-
Page 10: Notice About Recycling
Erp Directive: 09 / 125 / EC RoHS Directive 11 / 65 / EU & 15 / 863 / EU The detailed declaration of conformity can be found at www.morris.gr Exclusive importer in Greece: Kalliopi Karyda & CO LP 87A, 17 Noemvriou str, P.C.
Need help?
Do you have a question about the MBH-16314 and is the answer not in the manual?
Questions and answers