Removal Of System Components From Shipping Skids - YASKAWA ArcWorld 50 System Manual

ArcWorld 50/50S/52/52S
3.3
3 Installation

3.3 Removal of System Components from Shipping Skids

Removal of System Components from Shipping Skids
The ArcWorld components are attached to wooden shipping skids at the
factory, prior to shipment. The customer is responsible for removing the
shipping skids and inspecting the components for shipping damage.
If there is any equipment damage, notify the shipping contractor as
soon as possible.
1. Unbolt the ArcWorld components from the shipping skids using a
3/4-inch hex socket (see Fig. 3-4).
Figure 3-4: Typical Stabilizing Screw and Removal of A Shipping Lag Bolt
NOTE – An air-powered tool is not required for removal of the shipping bolts, as these fasteners can be
removed with ordinary hand tools. However, the air-powered tool does make quick work of the
task.
TYPICAL WORK
CELL COMPONENT
STABILIZING SCREW
(HOLLOW CORE)
2. Discard or recycle the shipping skids and other shipping materials.
3-8
NOTICE
AIR IMPACT DRIVER WITH ¾ INCH
SOCKET
(see NOTE)
WOODEN SHIPPING
PALLET
183574-1CD
183574-1CD
72 of 126