Operation Via The Text Interface; The Plug Status Screen - Text Interface; The Help Menu (Administrator Mode; Text Interface) - Western Telematic M User Manual

COMMAND MENU:
DISPLAY
/S Plug Status
/SG Plug Group Status
/SN Network Status
/H Command Menu (Help)
/L Log
/M Current Metering
/J [*] Site ID
CONTROL
<Enter> Enter Command Mode
/X Exit Command Mode
/C <n> Connect - Local
/D <n> Disconnect Port
/BOOT <n> Boot Plug n
/ON <n> Turn on Plug n
/OFF <n> Turn off Plug n
/DPL Default all plugs
/U Send Parameter File
/K <k> Send SSH Keys
/UL Unlock (Invalid Access)
Add ,Y to bypass "Sure?"
MPC>
Figure 9.1: The Help Menu (Administrator Mode; Text Interface)

9.2. Operation via the Text Interface

When using the Text Interface, all switching functions are performed by invoking simple,
ASCII commands. ASCII commands are also used to display status screens and to log
out of command mode. The Text Interface includes a Help Menu, which summarizes all
available MPC commands. To display the Text Interface Help Menu (Figure 9.1), type /H
and press [Enter].
Note: When the Help Menu is displayed by a SuperUser, User or ViewOnly
level account, the screen will not include commands that are only available to
Administrator level accounts.
9.2.1.

The Plug Status Screen - Text Interface

When you login to the MPC command mode via the Text Interface, the first screen
displayed after login is the Plug Status Screen. The Plug Status Screen lists the current
status of the MPC's Switched AC Outlets and displays the currently defined Site I.D.
Message.
Normally, the Plug Status Screen will also be re-displayed each time a command
is successfully executed. Note however, that if desired, the Automated Mode (See
Section 9.3) can be enabled to suppress the display of the Plug Status Screen after
each command.
Version 1.60
CONFIGURATION
/F System Parameters
/P [AUX] Port Parameters
/PL [n] Plug Parameters
/G Plug Grouping Parameters
/N Network Configuration
/RB Reboot Options
/AC Alarm Configuration
/I Reboot System
/UF Upgrade Firmware
/TEST Test Network Options
+-------------------------------+
| n Plug/Port # or name
| n:n = plug n through plug n
| n+n = plug n and plug n
| k Key type (1-3)
| * "all"
| <> Required entry
| [] Optional entry
| , Link multiple plug commands|
+-------------------------------+
9-4
Operation
|
|
|
|
|
|
|