8
Change for Daylight Savings time
Info
The following settings are
possible:
AUTO
Factory presetting of the
published calendar dates.
This is automatically
recalculated for each year.
NO
No switchover
CALIBRAT
Programming for the start
and ending date / or daylight
savings time must be entered
for this purpose.
The factory presetting is
overwritten.
The
programmed daylight
savings time is automatically
recalculated for each year.
The changeover takes
place on the same speci -
fied day of the week in
the same week of each
month.
Example
03/21 Start Daylight Savings
time
10/31 End Daylight Savings
time
Downloaded from
Elcodis.com
electronic components distributor