Siemens NK8000 MP.4.60 Installation Function & Configuration Commissioning Safety Regulations page 6

About this document
6
Building Technologies
Fire Safety & Security Products
- Document Type: All
- Image Type: All
- Advanced search criterias: Select Brochure No. and enter the document
number to search for (
DMS8000
product name (
2. Click Search to start.
3. In the resulting area on the right, click on Contents link to show the list of search
results.
For more information such as Siemens news and announcements, visit the STEP Web
portal at:
https://workspace.sbt.siemens.com/content/00001123/default.aspx
Note: Before beginning work on the system you must have read and understood the
Safety Regulations
section in this manual.
Liability disclaimer for damage or injuries
Before products are delivered, they are tested to ensure they function correctly when
used properly. Siemens disclaims all liability for damage or injuries caused by the
incorrect application of the instructions, or the disregard of danger advisories. This
disclaimer applies in particular to personal injuries or damage caused by:
Improper and/or incorrect use.

Disregard of safety instructions in the documentation or on the product.

Poor maintenance or a lack of maintenance.

We have checked the contents of this manual for agreement with the hardware and
software described. Since deviations cannot be precluded entirely, we cannot
guarantee full agreement. However, the data in this manual are reviewed regularly and
any necessary corrections are included in subsequent editions. Suggestions for
improvement are welcome.
Copyrights and registered trademarks
Brand or product names mentioned in this document may be names protected by
copyright law or registered trademarks of other companies. These are mentioned only
for identification purposes and have no recommendatory character in regard to the
product or manufacturer, unless otherwise stated.
Documentation Conventions
The following table lists conventions to help you use this document in a quick and
efficient manner.
Convention
Numbered Lists (1, 2, 3...) indicate a
procedure with sequential steps.
One-step procedures are indicated by a bullet
point.
A6V10089056
). Alternatively, select Title and enter the
).
Examples
1. Turn OFF power to the field panel.
2. Disconnect the power cord.
3. Open the cabinet.
Expand the Event List.

A6V10062437_a_en
30.06.2013