3. Using the display
The main use of the buttons is as follows:
Round Green button changes the units
● Kilowatts
● Amps
● Clock, calendar and temperature
Rectangular green button
● In Kilowatts and amps:
● Real-time display
● Accumulator
● In Clock:
● Day
● Month
● Year
● Temperature
Square red button (in Kilowatts and Amps)
● Total
● Phase 1
● Phase 2
● Phase 3
3.1 Real-time or Predicted Mode
Eco-eye Smart normally shows how much electricity you are using right now. This is real-time or
predicted mode. You will see the arrow and P (see left) when you are in predicted mode.
7 days history is stored on the monitor and can be accessed in Amps and Kilowatts by pressing
the left arrow key. The icon will change to H
Press the green rectangular button to return to real-time display.
3.2 Accumulator.
Smart has an accumulator feature built in so you can see the totals of each phase separately and
see if one phase is using more than another over a given time period of 1 day.
To activate this function you just press the rectangular green button on KW or Amps and "hour" in
the top right will change to a calculator symbol on the bottom of the display. This tells you it is
accumulative consumption so far today.
Smart 3pA Page 9