Table of Contents
Advertisement
2.2 Locating your meter
Once you have located your electricity meter it should look something like the one listed
below.
You will need to connect the 3 sensors round the 3 live cables coming into that meter. The
sensors simply clip round each of the coloured cables – Red, Yellow and blue. (The black is the
neutral)
In the picture below there are 2 cables for each phase, generally the left hand one is from the grid
and the right one is the supply to the property. It is best to use the right cable as the left one is the
property of the supply company
Smart 3pA Page 5
Advertisement
Table of Contents
