Motor Cord Connection; Connecting The Control Unit ( Ne260 ) To The Selector Unit ( Ne261 ) - Nakanishi E3200 Series Operation Manual

8

MOTOR CORD CONNECTION

( 1 ) Align the guide pin A on the motor plug with the key way B on the motor socket on the
front of the control unit.
( 2 ) Screw in the coupling nut C of the motor plug to the motor socket D on the front of the
control unit.
CAUTION
Before connecting the motor cord, make sure the power switch is OFF.
C
Fig. 13

CONNECTING THE CONTROL UNIT ( NE260 ) TO THE SELECTOR UNIT ( NE261 )

9
9-1 Connection of Motor Cord ( Provided )
Connect the Motor Cord ( Length : 60 cm Provided ) to MOTOR connector on the ( NE260 ) and
Motor Input Connector [ 11 ] . Refer to the details on 8 MOTOR CORD CONNECTION.
Control Unit
( NE260 )
Motor Connector
Motor Cord
11
A
Fig. 14
8
Selector Unit
( NE261 )
[ 11 ]
Motor Input
Connector
Fig. 15
9-2 Connection of Communication Cable ( Provided )
Connect Communication Cable ( Length : 60 cm ) to Communication Connector for
Unit ( NE260 ) & Communication Connector [ 13 ] on the ( NE261 ) .
Control Unit
( NE260 )
Connector for
Communication ( NE260 )
B
D
Communication
Cable
CAUTION
Never use the provided Communication Cable for any purpose other than
connection between the NE260 and NE261 units. Do not use any cable other than
the provided Communication Cable for data transfer between the NE260 and NE261.
Failure to adhere to this caution could cause damage to the systems.
9-3 Connection of Motor Plug
Connect Motor Plug of Motor Spindle to Motor Output Connector [ 3 ] [ 5 ] [ 7 ] [ 9 ] on the NE261.
Refer to 8 MOTOR CORD CONNECTION for details.
8
Attach Connector Caps ( Provided ) for safety when not using Motor Plugs.
[ 3 ]
Motor Output Connector
[ 5 ]
Motor Output Connector
[ 7 ]
Motor Output Connector
[ 9 ]
Motor Output Connector
Control
Selector Unit ( NE261 )
[ 13 ]
Connector for
Communication ( NE261 )
Fig. 16
Selector Unit ( NE261 )
Motor Plug
Fig. 17
12