Table of Contents
Advertisement
6.
The Link LED should be solid green indicating that the modem connection has been made. (See Figure 3.)
7.
During use, a pulsing yellow Activity LED indicates that data is being transmitted and received on the Ethernet
interface.
8.
Proceed to "Setting Up Your WebShare Account" on page 11 to configure the software.
Cable Connectors
There are connectors on the side panel of the WireSpeed (Figure 3) for Power, an ON/OFF switch, 6-pin RJ-11 DSL
(LINE) connector and 8-pin RJ-45 ETHERNET connector for customer terminal equipment. Tables 1-3 list the connector
types and pinout designations.
030-300166A
ADSL LINE
ON/OFF
SWITCH
Figure 1. WireSpeed Single-User Setup Connections
O
LINE
POWER
DSL CONNECTOR
SWITCH
Figure 2. WireSpeed Modem (Connector Panel)
ETHERNET
POWER
CONNECTOR
10Base-T
CONNECTOR
I
ETHERNET
POWER
CONNECTOR
3
WireSpeed ADSL Modem
User Guide
WireSpeed Installation
Advertisement
Table of Contents
