Table of Contents
Advertisement
WireSpeed ADSL Modem
User Guide
TROUBLESHOOTING
Software Installation
If you have more than one adapter, the following screen appears:
Figure 38. Choose Adapter
Click the option button for the network card the modem is connected to. Click Next. The IP Address Settings screen
appears.
Figure 39. IP Address Settings
If you know there is a conflict with the default IP Address and Subnet settings, adjust the defaults.
Click Next. The Reboot Required screen appears.
Restart the computer and run the setup program again.
NOTE: On Windows 98, Windows ME and Windows 2000, if the Auto IP feature was not disabled, Windows will assign
an address of 169.254.x.x. This problem should not occur for these operating systems.
030-300166A
43
Troubleshooting
Advertisement
Table of Contents
