Westell Technologies Westell LiteLine 6000 User Manual page 132

User Guide
When the diagnostic software has finished loading, the Setup Complete screen will be displayed. Select Run
application now, and then click on Done. An icon for the diagnostic features will be placed in your taskbar.
The diagnostic software can affect key settings of your communications software, and should only be run when
instructed by your service provider. For additional details on the diagnostic functions, see the Diagnostic Icon
Information Panels.
Your modem software installation is complete. Follow the instructions provided by your service provider to
configure your Westell Modem and browser settings.
If your computer already has an Ethernet adapter or NIC installed, you may have to disable the
!
adapter or set a static IP address in the PC for the modem. Contact your service provider for more
details.
Diagnostic Icon Information Panels
From the Start Menu, select Programs > Westell > Diagnostic Icon. The Administration Diagnostic Panel
opens.
Note: When the diagnostic application begins, the system places the following icon in the taskbar.
030-300411 Rev. A
Westell (Models 6000, 6100, 6110)
132 July 2004